NEW ABB PSTX Softstarter range 30-1250amps

NEW PSTX softstarter

The advanced range ~ The PSTX comes to the market fully loaded. The PSTX is ABB's latest advancement in motor control and protection and adds new functionality with increased reliability to any motor starting application. ABB's softstarters increase a motor's lifetime by protecting it from electrical stresses. They do so by letting you optimize starting currents that with conventional starting methods put lots of stress on the motor. With many built-in motor protection features, your motor is safe in its hands.

ABB2016

PSTX2016The ABB PSTX Softstarter family helps you use your process to its fullest potential. Many features like torque control, jog with slow speed and pump cleaning were designed to deal with specific problems that may occur when using conventional starting methods. The PSTX helps both your motor and application do more.

The PSTX offers complete motor protection in only one unit and is able to handle both load and network irregularities. PT-100, earth fault protection and over/under voltage protection along with many other functions keep your motor running even through the roughest of networks.

Built-in bypass saves time and energy When reaching full speed, the PSTX will activate its bypass. This saves energy while reducing the softstarter’s heat generation.On the PSTX, the bypass is built in and verified by ABB, saving you time during installation and space in your panel.

 

ABB’s PSTX range of soft starters are easy to install and operate. They providing unique features including:

  • pump cleaning, which prevents pumps from clogging and overheating
  • limp mode, which enables continued pump operation even when a thyristor set has failed
  • integrated dynamic motor braking, which stops a motor fast, a useful feature when operating a circular saw, for example

Main features

Three-phase controlled                  Built in Bypass                      Detachable Easy to use HMI
Built in Modbus RTU for easy monitoring                  Operational voltage: 208-690 V AC
Wide rated control supply voltage: 100-250 V, 50/60 Hz  Rated operational current: 30…1250 A (inside delta: 2160 A)
Coated circuit boards                Analogue Output for easy measurement          Torque control for excellent control of pumps.

Main benefits~ Built in at no extra cost

Easy to Set up and Install Secure motor reliability Pump control comes as standard
• Soft Pipe Fill Reverse operation Eliminate water hammer with torque control Avoid running dry with underload protection

Intelligent Detachable HMI

So easy to set up, Please take the 30 second challenge

450kWworkingmodel

The PSTX softstarter comes with a detachable HMI as standard. The interface and overall design resembles other ABB products, making it easy to learn.

You can place the HMI on your panel door to avoid having to open it up when using the softstarter. And with over 10 languages, the ability to copy settings and the fact that you can customize the HMI to match your specific needs, the PSTX truly is the most user-friendly softstarter yet.

The PSTX has 17 pre-installed languages along with options to customize your own specific home screens (up to seven different). You can use your customized home screens to show status information important to your process – and hide information that is not. See 450kW Example Here

 

Get More information here

ABB PSTX 2016 Brochure

ABB PSTX working in Water Industry Pump Control

ABB PSTX Quick guide Installation

ABB PSTX Installation and Commissioning